DESCRIPTION
- Also known as MALE REVOLVING CENTRE- TRIPPLE BEARING HD
- These Centres consist of three anti-friction steel bearings lubricated & protected against contaminants & coolants.
- These Center have two deep groove ball bearings & one thrust ball bearing for combined loads.
- The Body made of high-grade carbon steel is hardened.
- The point made of high-grade tool steel with hardness 60-63 HRC is precisely ground to 60°. Maximum radial run-out within 0.015mm.
- Knurled body for a firm grip.
Revolving Center Extra Heavy Duty are available with:
- Plain Point
- Carbide Tipped Point
Dimension Chart For Extra Heavy Duty Revolving Center- Plain Tipped

Product Range | Revolving Centres (Live Centre) |
---|---|
Tip Type | Plain Tipped |
Morse Taper | 5 |
Brand | RR Brand |
Shank Taper |
∅ d |
∅ D |
∅ D1 |
∅ L1 |
∅ L2 |
∅ L |
Max. Job |
Conc. |
MT-1 |
18.0 |
46.5 |
12.065 |
26.0 |
51.0 |
53.5 |
25 |
0.015 |
MT-2 |
23.0 |
50.0 |
17.780 |
31.0 |
61.0 |
64.0 |
50 |
0.015 |
MT-3 |
30.0 |
62.0 |
23.825 |
38.0 |
70.5 |
81.0 |
75 |
0.015 |
MT-4 |
30.0 |
62.0 |
31.267 |
38.0 |
73.5 |
102.5 |
100 |
0.015 |
MT-5 |
34.0 |
68.0 |
44.399 |
42.0 |
78.0 |
129.5 |
150 |
0.015 |
MT-6 |
50.0 |
105.0 |
63.348 |
58.0 |
91.0 |
182.5 |
200 |
0.015 |